Description

The RAC008 (C45 Dynamo replacement) now has a 60 Amp output as opposed to the original 40amp. This now means that it offers more than three times the power of the original dynamo together with increased reliability and full power available at engine tick-over speed.

• Amps: 40A
• Bracket distance: 165 mm
• Shaft diameter: 17 mm
• Polarity: negative Earth
• Voltage: 12V
• Weight: 4,2 kg
• RAC008 (For Positive Earth use the RAC014)

Fitting instructions

Wiring instructions

Accessories

This 12V Dynalite unit replaces the Lucas C45 and is for negative earth applications only. It has an output of 40A compared to 25A of the original and weighs 4.2 kg, compared to 6 kg originally. A C45 for positive earth applications is also available.

To ensure that the dynamo on your vehicle is a C45, it should be stamped with ‘C45’ on the case. If you cannot find this, check the distance between the mounting flanges, it should be approximately 165 mm.

Dynalites are not supplied with a pulley or fan fitted. However, as the shaft diameter of the Dynalite is 17 mm, the fan and pulley from your old dynamo will fit.

When connecting the Dynalite to your vehicles electrics, there are two options:

1. Use the existing control box as a junction box.
2. Dispense with the original control box and purchase from us a dummy control box which acts a connection box, but also has an integral fuse. The integral fuse, fuses the output of the Dynalite, to protect the wiring of your vehicle in case there is a short circuit within your existing wiring. (This is the recommended option, due to the fusing capability).